Animo OptiFresh Service Manual download pdf (Page 5)

12/2009 Rev. 0.2

Safety provisions

This device has the following safety provisions:

Door switch (1-16)

The machine has a door switch that automatically switches off the machine when the door is opened.

[ Out of order Door open ] The machine can be switched on whilst the door is open (for example for

cleaning) by inserting the supplied service pin in the door switch.

Temperature safety device ( g. 1-6)

The device has a temperature safety device that is accessible from the outside. It is located at the

back of the device ( g. 1-6). The safety device turns off the heating element if the temperature is too

high. This is usually caused by not descaling the device in time.

On/off switch ( g. 1-18)

The on/off switch turns the device on and off. The device can still be charged after it is switched off! In

order to ensure that the machine is entirely uncharged, please unplug it.

C switch (Cancel) ( g. 1-4.4)

The dosages of a coffee jug recipe can be stopped simply by pressing the Cancel button. After the

Cancel button is pressed, the selected coffee jug recipe is cancelled and the quantity for only one cup

is dispensed.

Display warnings ( g. 1-4.1)

Technical malfunctions are shown on the display by means of an error code (e.g. E1). In that case,

read 12. Troubleshooting.

Display warnings ( g. 1-4.1)

If the drip tray is too full, this is shown on the display [ Out of order Drip tray full] and

the operating panel is disabled. Once the drip tray is emptied, the display message automatically

disappears and the operating panel becomes functional again.

Devices and the environment

Packaging materials

In order to prevent that your new purchase is damaged, the machine is carefully packaged.

The packaging does not harm the environment and mainly consists of the following materials:

• Corrugated cardboard

• Filler elements made of polyurethane foam >PUR< covered in a polyethylene  lm >PE-HD<.

Contact the waste depot of your local council for the removal of these materials.

Replacement of the device

Not one device lasts forever. If you wish to replace your device, it is usually taken back in consultation

with your dealer. If not, please contact your local council for the possibilities of re-using the materials.

All synthetic parts are coded in a standardised way. Device parts such as circuit boards and their

components come under electric and electronic waste. The metal casing is made of stainless steel

and be entirely taken apart.

1. GENERAL

Major parts ( g.1)

1. Illustration

2. Cups tray (can be folded in)

3. Drip tray

4. Operating panel

4.1 Display

4.2 Strength setting

4.3 Drink selection 12x

4.4 Correction / Stop button

4.5 Drink dispensing button

4.6 Water dispensing button

4.7 Jug lock

5. Coin mechanism (optional)

6. Dry-boil protection

7. Fan

8. Water connection

9. Electricity lead

10. Operator panel

10.1 Stand-by

10.2 Open brewer

10.3 Clean mixer(s)

10.4 Operator menu

10.5 Clean brewer

11. Door lock

12. Brewer unit

13. Drink outlet

14. Hot water outlet

15. Waste bin coffee residue

16. Door switch

17. Boiler draining tube

18. On/off switch

19. Mixer unit(s)

20. Dispensing bent pipe(s)

21. Instant canister

22. Grinder

23. Bean canister Fig. 1

OptiFresh 4 bean is model shown

4.1

4.3

4.7

4.4

4.5

4.2

4.6

10.1

10.2

10.3

10.5

10.4

1 2 3 4 5 6 7 8 9 10 ... 26 27

Comments to this Manuals

No comments

Animo OptiFresh Service Manual Page 5

Comments to this Manuals

Related products and manuals for Coffee makers Animo OptiFresh