Animo OptiFresh Service Manual download pdf (Page 11)

12/2009 Rev. 0.2

5. OPERATING PANEL

The device has two operating panels.

• The front operating panel ( g. 22) is for normal

daily use.

• The operating panel at the inside of the door

( g. 23) can be used by the operator to gain

access to the operator and service menus

(only with PIN code).

CAUTION

• Never operate the buttons using a sharp object.

• Keep the operating controls free of dirt and grease.

5.1 Operating panel (front)

A. Illuminated Display

B. Strength setting for coffee, milk and sugar.

 You can choose the ingredient for which you wish

to set the strength with the Set button

 You can set the strength with the +/- button.

C. Option button 12x, set as mentioned in chapter 3.8

D. Correction / Stop button for correcting made

choices and stopping (aborting) the dosage of a jug.

E. Drink dispensing button + LED. Blue LED  ashes

to indicate dispensing position of the goblet/cup.

The LED is on consistently during the dosage until

the drink is ready.

F. Water dispensing button

+ LED. Blue LED

 ashes to indicate dispensing position of the goblet/

cup. The LED is on consistently during the dosage

until the drink is ready.

G. Menu navigation buttons 7 to 10 have a second

function after the operator menu has been acti-

vated.

H. Jug lock, After activating the key, all recipes

showing the

pictogram can be used as a jug

button. After the choice of drink, the display shows

how many cups are made. You can set the number

of cups with the +/- button.

Fig. 22

5.2 Service panel (inside the door)

A. Standby

With this button you can set the device on standby. The

selection buttons are turned off and the boiler is kept at

60°C. Display: [Not in use – Standby]. Push this button

again to reactivate the machine.

B. Open brewer

With this button you can set the brewer unit in the 'open'

position, so that the upper brewer section can be taken

out for cleaning. See chapter 8.5 Cleaning the brewer

section. Push this button again to close the brewer

unit.

C. Mixer(s) rinsing programme

With this button the rinsing programme for the mixer(s)

will be started. For detailed instructions, see chapter

8.4 Cleaning the mixer unit.

D. Operator menu button

With this button the Operator menu appears on the

display. See chapter 6.1 Operator menu. Press this

button again to leave the Operator menu.

E. Brewer rinsing programme

With this button you start the rinsing programme for

cleaning the brewer. For detailed instructions, please

see chapter 8.3 Cleaning the brewer unit.

Fig. 23

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 26 27

Comments to this Manuals

No comments

Animo OptiFresh Service Manual Page 11

Comments to this Manuals

Related products and manuals for Coffee makers Animo OptiFresh