Animo OptiFresh Service Manual download pdf (Page 17)

12/2009 Rev. 0.2

8.3 Cleaning daily

8.3.1 Cleaning the brewer unit

The brewer is in constant contact with coffee. After

some time, a deposit of coffee oils, coffee particles

and minerals from the water forms on the brewer's

permanent  lter. This will reduce the permeability of the

 lter and therefore increase the chances of the brewer

section over owing.

During the cleaning procedure, the brewer is  lled with

hot water. After a soaking period, the brewer is rinsed 3

times with hot water.

Duration: approx. 3 min. (rinsing water approx. 800 ml).

Requirements:

- Collection tray of at least 1.5 litres.

In order to clean the brewer:

1. Open the machine door and press the brewer

cleaning button ( g. 43-1).

2. Close the door or position the service pin (see

chapter 8.1) so that the door can remain open.

3. Follow the instructions shown by the display

( g. 43-3) and use the X and V buttons on the

operating panel ( g. 43-2).

Stopping the cleaning cycle?

 The start of the brewer cleaning procedure can be

cancelled with the X button or by the C button.

 Increasing the boiler temperature and soaking the

brewer can be skipped with the X button or by the

C button.

 The rinsing progress (3x) can be interrupted with the

X button or by the C button.

8.3.2 Emptying and cleaning the waste bin

Empty the waste bin every time you

have  lled the fresh brew canister.

Tip: use a well- tting bin liner ( g. 44)

in order to empty and clean the waste

bin quickly!

8.3.3 Cleaning the mixer unit

The mixer casing is in regular contact with the product

and must therefore be cleaned thoroughly and regularly.

The mixers are rinsed with hot water 3 x during the

cleaning procedure.

Duration: approx. 1 min. (rinsing water approx. 800 ml).

Requirements:

- Collection tray of at least 1.5 litres.

For cleaning the mixer(s);

1. Open the door of the machine and press the mixer

cleaning button ( g. 45-1).

2. Close the door and position the service pin (see

chapter 8.1) so that the door can remain open.

3. Follow the instructions shown on the display

( g. 45-3) and use the X and V buttons on the

operating panel ( g. 45-2).

Stopping the cleaning cycle?

 The start of the mixer cleaning procedure can be

cancelled with the X button or by the C button.

 Increasing the boiler temperature and soaking the

brewer can be skipped with the X button or by the

C button.

 The rinsing process can be interrupted with the

X button or by the C button.

Fig. 45

Min 1,5 L

 

 

  



 

  

 

 

 



 

 

Fig. 43

Fig. 44

Min 1,5 L

 

 

  



 

 

 



 

 

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 26 27

Comments to this Manuals

No comments

Animo OptiFresh Service Manual Page 17

Comments to this Manuals

Related products and manuals for Coffee makers Animo OptiFresh